Advertisement

Responsive Advertisement

 
HOW TO DYE SARI SILK RIBBON YARN
 
 
Sari ribbon yarn comes in all sorts of colors, just not the colors I needed. So I thought I would just dye it myself.  It's easy and the best thing about silk is it doesn't felt so you can do all sorts of things to silk that you can't do to wool.  It sort of feels good to be able to break the rules and still end
up with an amazing end result.
 
What you will need: 
 
   Sari ribbon yarn
   Gloves
   Dye - I prefer Pro chem of Jacquard
   Large dye pot
   2 long spoons
   Stirring spoon
   Plastic wrap
   Steamer
   Pro Soft
 
1.  First you will need some beige sari ribbon yarn
 
 
 
2. Loosley tie it in four places with a figure eight tie.  I wet mine in water (the temp does not matter) with a glug of vinegar. You could use a tablespoon or so of citric acid in place of the vinegar if you want.  It doesn't need long, about five or ten minutes.
 
 
 
3.  Remove and squeeze out excess water.  Put a long spoon through one of the ends and place another long spoon over the top like in the photo.
 
 
 
 4.  Now roll the spoons together till you are at about the half way point of the skein.

 
5. Make a dye pot with about four inches of water. I use Pro Chem dyes and make a nicely saturated solution.   Balance the spoons across the top of the pot so about half the yarn is submerged in the dye pot.  Smoosh down the yarn with a spoon. Remember to use utensils and pots designated only for dying. Turn heat to low and keep the yarn in for about 10 to 15 minutes. The dye with NOT exhaust.  Take the yarn out when you are happy with the color.

 
6. Gently squeeze out the yarn with rubber gloved hands.  Now you have half the skein dyed.

 
 7.  Put the spoons through the dyed half of the skein.  Make another dye pot of a contrasting color and submerge the other half in the dye pot. I put a bit of the red in the yellow so I would get a nice color blend.


8. Remove the yarn when you are satisfied with the color and squeeze out the excess water in the sink.  Use rubber gloves or you will have pink hands.  Hint:  Put a winter glove on first then a large rubber glove over that.  You can now put your hand in simmering water with no problems.



9.  Put the dyed yarn on saran wrap and fold over the edges and roll it up loosely jelly roll style.

 
10.  Place the roll in a steamer and steam for about 30 minutes.

 
11. When done remove from the pot and rinse in water with a bit of Pro Soft. This will add softness to the yarn.  Soak for about 10 to 20 minutes.  You can use any temp water you want.  When done soaking rinse and squeeze the skein under running water, you should have no bleeding at all.  Hang unweighted to dry.


12.  And voila! You have your own custom dyed sari ribbon yarn.  The colors really bring out the shine of the silk. 

 
I sell beige sari ribbon yarn, please contact me at info@camajfiberarts.com for more details
 
 

Post a Comment

12 Comments

  1. So that's how its done! Nicely done, Mary!

    ReplyDelete
  2. can you explain why you need to steam after you have dyed the ribbon in the pot
    ]
    thanks

    ReplyDelete
  3. I steamed it because the dye did not fully exhaust and I wanted to make sure the ribbon did not bleed after it was made. Thanks for the question!

    ReplyDelete
  4. This comment has been removed by a blog administrator.

    ReplyDelete
  5. Thanks for the post this information is really useful. It gave me so much information for which I was unaware.
    Please keep posting about designer sarees also.

    ReplyDelete
  6. wow great effort
    http://www.unnatisilks.com/
    online westren wear
    online designer salwar kameez
    online womens wear
    online party wear

    ReplyDelete
  7. Really that is the great work of silk sarees...thanks for your post...keep blogging

    ReplyDelete
  8. Super Blog.. :) thanks for sharing valuable information.
    Find trendy, fancy and traditional and handcraft sarees at http://www.bujju.com/

    ReplyDelete